Video: New Cat D9 Dozer Replaces D9T, Lowers Maintenance Costs
Wayne Grayson|2020年10月26日

Cat has replaced the D9T with the new D9. As a next generation dozer, there are some foundational changes to the structure of this machine to discuss, but most of what’s new focuses on reducing O&O costs, including a new torque converter and maintenance improvements.



The Cat D9 is powered by a 440-net-horsepower C18 engine.

As we’ve discussed several times over the last year or so, Cat is in the process of a lineup-wide refresh of its dozers.

他们在2018年开始介绍这些新的下一代Dozers,D6和D6 XE中的第一个。然后,该公司随后在过去12个月内用新的D1,D2,D3,D4,D5和D7型号与大多数中小型Dozer阵容的更换。

And now we’ve got our first next-gen large dozer, the new D9, which is replacing the D9T.

A hallmark of these new next-gen models has been a new cab, but the new D9’s got a bit more going on than that when it comes to upgrades. Specifically, much of this new dozer’s development was focused on saving you money over the course of the life of this machine.

But before we get into the specifics of the D9, as we’ve done with all of our coverage of next-gen Cat dozers, we have to take a second and acknowledge the new model name on this machine.

2017年,猫决定停止在模型名称中使用信件,以表示新一代机器,希望在公司内部每台机器阵容进行一点更容易理解。

在推土机阵容,这实际上是一个转为叙述e more complicated because not only were letters being used to denote generations of certain models, they were also being used to denote different sizes of the same dozer model.

一个例子是三种不同的类型of D6 dozer that you could buy at one point.

So, under this new naming convention, the D9T is now just the D9. If you want a more thorough explanation of this new way of naming dozers, check out our video on the new D4—which used to be called the D6K2. In that video we get more into Cat’s thinking behind this change and how it clears up the product line a bit.

A next-gen D9

Now, because the D9 is a next-gen dozer, there are several important changes made to this machine that while not outwardly apparent, as Cat dozer and mining product expert Todd Cole outlined, are still very significant to the platform.

“电气架构,ECM的减少,对真正轻微的帧的一些变化,[但很重要]对于具有不同配置和共性的可制造性和互换性以及一些大型戴策族,”Cole说。“我们可以利用的措施越多,模型之间的变化越少,而且[这是]对客户的益处,对经销商和我们来说。”

Beyond bringing the D9 in line with other next-gen dozers, the other focus for Cat on this new model was total cost of ownership, and that’s an important consideration for this machine specifically because it is a large machine that is used in pretty rough production environments.

Plus, thanks to its size and a wide range of blades and attachments available for it, it can be used for several different tasks across multiple industries.

“所以取决于你在世界的位置,它是一个采矿机。在北美,它可能会被视为沉重的建筑。但它绝对坐在两大洲之间的土地,“科尔说。“我们正在浪费,我们在库存应用,沉重的建筑,木屑,剥落应用,带装载机的陷阱装载,以及挖掘和生产烫伤。所以我们在一切。如果您不得不拆除它,在过去的20年里看,[它] 25%采矿,40%是沉重的建筑/一般建设。而且剩下的碎片是那种专业,工业,租赁,浪费,所以我会称之为瑞士军队工具。“

Obviously return on investment and total cost of ownership are always important, but they’re paramount when plugging a machine into these severe environments. And to that end, Cat says it has reduced TOC by reducing fuel costs, reducing maintenance time and cost and through a few production boosting technology features.

新规格,性能相同

但让我们从减少燃料成本开始,因为这是什么让这种有趣的是它不是通过ECO引擎模式或可能限制性能的一些其他软件功能实现的。这是硬件变化。

The new D9 is powered by a 452-horsepower Cat C18 engine. Now, that’s the same engine that powered the D9T and though Cat’s spec sheets rate the new D9 a bit higher in terms of horsepower than its predecessor, it’s a negligible amount and Cole actually tells me it probably has more to do with differences in the testing done to find that rating and small differences in what rpm peak horsepower is achieved at rather than real world performance differences.

Another important spec apart from horsepower that is higher on this machine is operating weight. The new D9 weighs in at 110,225 pounds, while the D9T weighed in at 105,539 pounds. However, it’s also another change that hasn’t impacted performance.

So, despite the fact that the D9 is heavier and technically has more hp, in terms of raw power, the D9 isn’t all the different from the D9T.

“We did make some changes as I mentioned, we moved some weight around. There’s a new radiator guard and some slight changes really to the frame for manufacturability. But there is not what I call meaningful change to the weight of the machine,” Cole says.

New torque converter

So, let’s move on to what is different and that is fuel cost. Cat says you can expect to save 5 percent in fuel costs with the new D9 over the D9T, not due to engine enhancements or power modes, but due to two other powertrain updates: a new torque converter and a tweak made to the transmission.

D9上的新型变矩器实现了定子离合器,并且该离合器是大多数燃料节省的地方。

你可能知道,像manua离合器l transmission, the torque converter allows the engine on a vehicle with an automatic transmission to spin almost independently of the transmission and it essentially converts engine rotation into machine movement by pressurizing transmission fluid and then directing the flow of that fluid into the transmission.

The stator is really at the heart of the torque converter and it’s in charge of optimizing fluid flow between the two halves of the torque converter: the turbine on the engine side and the impeller or pump, which is on the side that connects to the transmission.

The stator allows for torque multiplication and plays a huge role in fuel efficiency because it effectively governs the efficiency of the torque converter and thus the powertrain. And you can increase the efficiency even further through a clutch that allows the machine to engage or disengage that stator.

“So when you go into the push, the stator clutch then will lock up and you get that torque you need. Then when you get to the part of the cycle where you back up, the stator will come unlocked. [During] maneuvering and light blade loads you don’t need that stator,” Cole says.

Plus, the stator clutch engages and disengages automatically. No input is needed from the operator.

But improved efficiency isn’t the only benefit of a stator clutch.

“The big thing to note is ‘Well why not just put a freewheel stator in as some of the other large dozers in the past have?” Cole says. “We get the ability to also put that stator locked back up in the case of retarding. So going back down a hill, you don’t want the machine to run away, the engine actually can help hold it back. That stator provides additional retarding capability, so we’re kind of getting the best of both worlds with that feature.”

With that 5 percent reduction in fuel cost brought by the stator, Cat says you can expect your material moved cost to drop by 3 percent.

“So it’s great because it pays the customer every day. Somebody is paying for every gallon of fuel. If you take that 5% put it over 4,000 hours at a customer site, you’re talking in excess of 2,200 gallons of fuel. So do the math. I mean, it’s big,” Cole says.

Improved maintenance

The other substantial improvement on the D9 is maintenance costs. Specifically, Cat is saying it has reduced maintenance costs by 4 percent and the first reason behind that reduction is a fully integrated Auto Lube system that requires fewer greasing points.

“It has an 8-liter tank, so you should have no problem running every bit of a month at a customer site,” Cole says. “And a great thing about the Cat Auto Lube system is it’s integrated into the design of the tractor. It also has an auto shutoff feature. So the lube guy can hook up to the machine, fill the tank, and then it’ll kick off when it’s full. Some designs require us to watch it because otherwise you end up with a massive pile of grease covering your tractor and all over the ground. And that’s just really not okay.”

“The lift cylinders that are on the radiator guard, those used to be greased, they’re no longer greasable. They’re greased for life,” Cole adds. “That’s actually a carryover design from the D7E.”

Engine oil pan capacity is also larger on this machine and Cole says the D9 in most applications should have no problem getting to 500 hours before an oil change is needed. Plus Cat has extended some of the powertrain filter change intervals all the way up to 2,000 hours, and they’ve included continuous fluid level monitoring.

“所以我们曾经曾经打开过钥匙,那么仪表会扫地,它说可以开始。因此,只需在隔间水平上确认,流体状况良好。所以现在我们已经采取了下一步,而运行它的机器监控发动机油,冷却剂,动力系和燃料箱的水平。因此,您仍然有安全网,当低油压亮起时,您将获得“运营商立即关闭”活动。这是在此之前,如果该罐隔间运行低,则达到了一些警告。因此,它真的有机会避免一些维护成本。“

As a safety and maintenance feature, Cat has also added secondary retention pins on the belly pan of the D9.

“那么降低那个肚皮锅,有时可以在那里包装那么多碎片,那个家伙或加仑让它下来,这可能是一个问题。所以他们会把它撬开,但你必须小心不要让它摆下来。所以现在有大约2英寸的抓住,允许它得到一些运动。“

在D9上的改进维护功能上舍入,是新的动力访问梯子和新的散热器护罩设计,可让您在机器的右侧提供更大的清洁,也提供较少的工具入口。

“With the new guard design, even an operator can open it up, get in there, you can blow it out, you can vacuum it out,” Cole says. “All dozers at some point are going to need to have a really good clean out. Debris gets packed in there, it’s just such a tight area to get rid of all the heat. So that’s another advantage that will help drive down ownership cost and the dozer.”

The new ladders are electric over hydraulic and allow operators to lower the ladders from ground level, climb up and into the cab and then raise the ladder back up.

起落架

Moving on to the undercarriage of the D9, this is essentially the same high-drive suspended undercarriage you’ll find on a D9T.

“The elevated sprockets have been around really since the 80s. And it has made some changes over time but really when you get specific to this program, we’ve got it pretty well dialed in,” Cole says. “So no significant change to the undercarriage, the roller frames, the final drives, the idlers, the rollers, the track, push arms, blades—the working end of the dozer is unchanged.”

虽然底盘组成部分相同,但猫将在一般职责底盘上提供D9的新的底盘选择。因此,您将有三种选择可供选择:一般职责,重型PPR和Dura Link或HDXL的重型延长寿命底盘。

Cat says the HD XL can boost undercarriage life anywhere from 20 to 40 percent thanks to that Cat patented and more robust Dura Link link design along with larger diameter bushing, track roller, and sprocket segments.

新车

除了更改电气和框架this machine, another part of bringing the D9 in line with the rest of Cat’s next-gen dozer lineup is the cab.

Inside the cab you’ll find a cloth air-suspension seat, an intuitive control scheme and a new 10-inch, high-definition touchscreen display.

“If you get in the cab today of a [D9T,] there’s at a minimum two screens on there. So one thing you’ll notice is that we brought everything from those two screens into one large 10-inch touchscreen display,” Cole says. “So if you can navigate your smartphone, you can figure out how to work this touchscreen. … It gets used also as a monitor for some of the camera systems so your ripper, your rear view that’ll show up right there in the center. You can do neat things like turn lights off individually just through the touch on the screen. So if you have a truck dump application, or you’re trying to get somebody’s attention, or you’re blinding someone, touch a button and you can individually control every light on that machine.”

Another nice touch inside this new D9 cab are two dials, one for throttle and the other for pre-selecting your gear.

“Most operators want to doze in first gear forward, then back up in second. But there can be applications or other operator preferences where you want to go to, say, just first to first and then be able to go first to second,” Cole says. “So without having to go in and set all that up [in the display], it’s a lot quicker through the touch of a button, using the auto upshift, downshift features. So it’ll be different. But it makes it easier on the operators, to use some of the technology and things that are baked into the machine.”

技术助攻

Another big element of this machine is the available technology on it and the options include 360-degree vision, automatic ripper control, AutoCarry and Automated Blade Assist.

360度的愿景是一款四个相机系统,缝合在一起 - 你猜到了它 - 一个360度的机器视图。有些人称之为机器的Birdseye或顶部视图及其附近的周围环境。您可以从驾驶室右侧的专用显示屏监控此360视图。

Cole noted during our talk that this isn’t a detection system, it’s just a vision system. So it won’t detect objects or people in your path and warn you. It’s meant more for operators trying to get a better view in front of the blade or behind the ripper.

Automatic ripper control, meanwhile, not only automatically maintains consistent ripper depth to avoid track slippage, it also automatically raises and stores the ripper when you’re done with it.

The AutoCarry feature automates the lift of the blade. Like ripper control this is really helpful in reducing track slippage and it improves load consistency which in turn increases your productivity and efficiency.

Then there’s Automated Blade Assist. With this option you can create preset blade pitch positions for load, carry and spread tasks.

“所以我们有一个推土机推动材料。一般来说,我们进入了那种削减,我们想加载那个刀片。然后在双倾斜机与那些双螺距缸上的双倾斜机上,我们实际上可以铺设材料,保持该材料,您可以推高达5%的双倾斜材料,“科尔解释说。“这要求操作员不断将输入放入那些倾斜圆柱体以切割,携带和倾倒。因此,随着按钮的推动,自动刀片辅助使能够反复使用操作员舒适性的功能。“

Another change with auto rip and auto carry is that previously, because the technology behind these features essentially monitors the same things in engine load and traction but on opposite ends of the machine, they were a package deal—all or nothing. Now they’re available separately.

Of course you can also equip this machine with Cat Grade with 3D machine control. Plus, in the near future, you’ll be able to equip the D9 with remote control.

“If you look at our bigger dozers, we’ve had that for a while. The D11 has a semi-autonomous tractor system…we’re not to that space yet in the D9. Going back to where we started this call, the D9 is a little bit everywhere. So remote does have a does have its play in some of the market out there. So we really wanted to finish out the product line by getting remote control in there,” Cole says.

没有评论

Your email address will not be published.Required fields are marked*